At the upper end of the collector vapor transmission is the coaming vent valve. KFE has a coaming vent valve type SK1975. These valves incorporate flame arrester and are tested and certified in accordance with European Standard EN13082. Depending on the application they are offered in variant Normal Open – SK1975NO and Normal Close – SK1975NC. The method of adjustment is flange TW1

SK1975NO - 3" Coaming Vapour Transfer Valve - Normal Open

Product Description

Durable construction and high flow design make this valve ideal choice for sequenced vapour recovery requirements.

– Robust Construction of the shell made of aluminium alloy tested for shell strength at 5 bar.

– Conforms to EN 13082:2001 European standard in valve design and test procedures.

– Poppet opening into the tank compartment to prevent loss of product in the event of tank overturn.

– Exceeds the requirements of the EN DROP TEST (EN 13082:2001).

– Viton seals are standard for problem free service with high octane unleaded petrol and additives.

– Stainless steel internal components for increased corrosion resistance.

– 8 bold on 130mm PCD fixing.

Technical Data

MWP: 7 kPa
Valve Weight: 2.1 kg
Test Pressure: 20kPa

Downloads

[wpdm_package id=2086 template=”57d7af918045b”]

Video Data

Technical Drawings
SK1975NO Design View

SK1975NC - 3” Coaming Vapour Transfer Valve - Normal Close

Product Description

Durable construction and high flow design make this valve ideal choice for sequenced vapour recovery requirements where the Normal Close configuration is needed.

– Robust Construction of the shell made of aluminium alloy tested for shell strength at 5 bar.

– Conforms to EN 13082:2001 European standard in valve design and test procedures.

– Normal Close poppet position.

– Exceeds the requirements of the EN DROP TEST (EN 13082:2001).

– Viton seals are standard for problem free service with high octane unleaded petrol and additives.

– Stainless steel internal components for increased corrosion resistance.

– 8 bold on 130mm PCD fixing.

Technical Data

MWP: 7 kPa
Valve Weight: 2.2kg
Test Pressure: 20kPa

Downloads

[wpdm_package id=2088 template=”57d7af918045b”]

Video Data

Technical Drawings
SK1975NC Design View