PV Vents

Necessary equipment for all tank vehicles in Class 3, valves and breathing SK2100 SK3100 exceed the requirements of the standard EN14595 and provide the necessary protection to the B / O both during normal operation and in emergency situations.

SK3100 - 1¼" Pressure and Vacuum Breather Vent

Product Description

Incorporated in all SK3000 & SK4500 series manhole cover assemblies and available also separately, the 1¼” SK3100 Pressure and Vacuum Breather Vent provides breathing for tankers including roll over spillage protection.

– Robust Construction of the assembly exceeds the requirements of EN DROP TEST (EN 14595:2002).

– Conforms EN 14595:2005 European standard in design and construction.

– Flame Trap Strainer for the prevention of the flame passage.

– High Flow through the 1¼” airways. Rated venting capacity of 100 m3/h at 30 kPa overpressure and 20 m3/h at 3 kPa vacuum.

– Overturn Protection through seal off valve.

– Viton Seals are standard for compatibility with unleaded petrol.

– Relieving Pressure settings selection available depending on any special needs. Coming as standard to 10kPa pressure – 1kPa vacuum relief.

– 1¼” NPT and BSP connections for compatibility with a wide range of manhole cover assemblies.

– 8 bold on 130mm PCD fixing.

Technical Data

P/V vent set pressure: 100 mbar
Overpressure venting capacity: 100 m3/h at 300 mbar
P/V vent vacuum set: 10 mbar
Vacuum venting capacity: 20 m3/h at 30 mbar
P/V vent weight: 0.54 kg

Downloads

Video Data

Technical Drawings
SK3100 Design View

SK2100 - 2" Pressure and Vacuum Breather Vent

Product Description

Incorporated in all SK3000 & SK4500 series manhole cover assemblies and available also separately, the 2” SK2100 Pressure and Vacuum Breather Vent provides breathing for tankers including roll over spillage protection.

– Robust Construction of the assembly exceeds the requirements of EN DROP TEST (EN 14595:2002).

– Conforms EN 14595:2005 European standard in design and construction.

– Flame Trap covering the requirements of the LGBF class.

– High Flow through the 2” airways. Rated venting capacity of 250 m3/h at 30 kPa overpressure and 80 m3/h at 3 kPa vacuum.

– Overturn Protection through seal off valve.

– Viton Seals are standard for compatibility with unleaded petrol.

– Relieving Pressure settings selection available depending on any special needs

– 2’’ BSP for installation in SK3000 & SK4500 series manhole cover fillcap.

– 8 bold on 130mm PCD fixing.

Technical Data

P/V vent set pressure: 100 mbar
Overpressure venting capacity: 250 m3/h at 300 mbar
P/V vent vacuum set: 10 mbar
Vacuum venting capacity: 80 m3/h at 30 mbar
P/V vent weight: 0.6 kg

Downloads

Video Data

Technical Drawings
SK2100 Design View