We provide you with ISO Container Products from FORT VALE™.

CORE SPECIFICATION

4 Bar ISO Tank Container

MANLID EQUIPMENT

The 500mm Pendle manlid assembly is a 4 bar MAWP unit available in 6 or 8 point fastening. The cover is a double skin construction which offers excellent thermal insulation. The assembly has no internal welds as the cover and the neckring with integral compensating ring are each made from a one piece pressed item, reducing corrosion risk and optimizing cleanliness.
Swingbolts are available with naval brass or stainless steel handnuts. All eyebolts are thread rolled and handnuts are fitted with a thrust washer (patented) as standard. Wide range of seals available to suit, including the Super Tanktyt recommended for corrosive and toxic products.

300mm Ultra Low Profile EN Pendle Inspection Hatch Assembly

300mm Ultra Low Profile Inspection Hatch Assembly – 4 point fastening double skin cover. 8mm thick pressed neck/compensating ring profiled to suit tank radius range from 850 to 1220mm. Contact parts manufactured in 316 stainless steel. Stainless steel swingbolts with naval brass handnuts. Seal supplied separately. Options – Stainless steel swingbolts with either stainless steel handnuts or low profile stainless steel/brass composite handnuts.

500mm Ultra Low Profile Pendle Manlid Assembly

500mm Ultra Low Profile Manlid Assembly – 8 point fastening. 8mm thick pressed neck/compensating ring profiled to suit tank radius. Contact parts manufactured in 316 stainless steel. Stainless steel swingbolts with naval brass handnuts. Seal supplied separately.

Options – 3 Bar 6 point version and 4 Bar 8 point version. Tank radius range from 750mm to 1300mm. Stainless steel swingbolts with either stainless steel handnuts or low profile stainless steel/brass composite handnuts. Cover hinge stop plate may be fitted to adjust opening angle.

SAFETY EQUIPMENT

2½” BSP Pressure/Vacuum Super Maxi Relief Valve

2½” BSP Super Maxi Emergency Relief Valve – 2½” BSP male connection with 65mm nominal bore. Suitable for a pressure range of between 2 – 75 PSI (0.14 – 5.17 Bar) and a vacuum range of between 0 – 26”Hg (0 – 0.88 Bar). Contact parts manufactured in 316 stainless steel. Fitted
with Fortyt seals as standard. Complete with rubber/PTFE tank seal.

Options – pressure only version. Flanged connections available. Range of high pressure extended body valves. Manual vent button option. A range of alternative seal materials is available.

82.5mm Flanged Hyper Maxi Pressure/Vacuum Relief Valve

82.5mm Flanged Hyper Maxi Pressure/Vacuum Relief Valve – Flange drilled 4 slots with a 145.0/152.4mm min/max PCD. (See below for drilling details) Suitable for a set pressure range of *2 to 75 PSI (*0.14 to 5.17 Bar) *See Note under Specification, and a set vacuum range of 0.5″Hg to 26″Hg (0.02 to 0.88 Bar). Contact parts manufactured in 316 stainless steel. Fitted with Fortyt
seals as standard.

Options – pressure only version. High pressure extended body version. Alternative seal materials are available. Fort Vale offers a full range of threaded and flanged relief valves.

AIRLINE EQUIPMENT

1½” Blacko Airline Ball Valve

1½” Airline Ball Valve – 1 ½” BSP male inlet. Complete with pressure gauge connection and TIR
facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals.

Optional extras – gauge guard and/or gauze filter, ¼” BSP plug with TIR wire.

2” BSP Airline Butterfly Valve

2” Airline Butterfly Valve – 2” BSP male inlet. Complete with pressure gauge connection, gauge guard and TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals.
Optional extras – gauze filter or sintered filters.

MKII 2" Flanged Airline Butterfly Valve

2” Flanged Airline Butterfly Valve – inlet flange slotted to suit 2” BSTD minimum. 4 hole tank connection to DIN50 PN10. Complete with ¼”BSP pressure gauge connection, gauge guard and TIR facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals.
Optional extras – gauze filter or sintered filter. TIR wire welded to gauge inlet plug.

DISCHARGE EQUIPMENT

3” 45° Cleanflow Footvalve

3” 45° Cleanflow Footvalve – inlet flange drilled 8 x 14mm holes equi-spaced on a 178mm PCD; outlet flange drilling as shown below. Contact parts manufactured in 316 stainless steel with Fortyt O ring to main poppet as standard.

Options – Other poppet seal materials available. Footvalve may be manufactured in other metals. A range of outlet flange configurations available. Conical poppet available for solidifying cargoes. Steam heated option. Available with integral Alloy C276 seat area for corrosive cargoes. Full range of 30°, 90° and 180° Cleanflow footvalves. A range of bolting kits and outlet gaskets is
available.

3” 45° MKIII Highlift Footvalve

3” 45° MKIII Highlift Footvalve – inlet flange drilled 8 x 14mm holes equi-spaced on a 178mm PCD; outlet flange drilled 4 x 17mm holes on a 160mm PCD. Contact parts manufactured in 316 stainless steel with Fortyt main seal as standard.

Options – Other poppet seal materials available. Footvalve may be manufactured in other metals. Full range of 30°, 90° and 180° Highlift footvalves. Steam heated option. Available with integral Alloy C276 seat area. A range of bolting kits and outlet gaskets are available.

3” 45° Uniflow Bottom Discharge Assembly

3” 45° Uniflow Bottom Discharge Assembly – comprising 3” 45° Cleanflow footvalve, inlet flange drilled 8 x 14mm holes equi-spaced on a 178mm PCD; footvalve body incorporates integral 3” butterfly valve terminating with 3” BSP spigot and stainless steel blank cap. Unique “CLEAN” position of butterfly valve closure plate allows for in-situ CIP without removal of the valve assembly from the tank. Manufactured in 316 stainless steel with Fortyt main seal to footvalve and PTFE main seal to butterfly valve and cap.

3” 45° Univalve Bottom Discharge Assembly

3” Univalve Bottom Discharge Assembly – comprising of 3” 45° Highlift footvalve, inlet flange drilled 8 x 14mm holes equi-spaced on a 178mm PCD. Footvalve body incorporates integral 3” butterfly valve terminating with 3” BSP spigot and stainless steel blank cap. Unique “CLEAN” position of butterfly valve closure plate allows for in-situ CIP without removal of the valve assembly from
the tank. Manufactured in 316 stainless steel with Fortyt
main seal to footvalve and PTFE main seal to butterfly
valve and cap.

DISCHARGE EQUIPMENT

3” Clamped Widdop Butterfly Valve

3” Clamped Butterfly Valve – left hand operated with TIR to handle and padlock facility. Contact parts manufactured in 316 stainless steel with PTFE main seal

TOP DISCHARGE PROVISION

3” Flanged Widdop Butterfly Valve

3” Flanged Butterfly Valve – inlet flange drilled 6 x 14mm holes spaced as shown below on a 168mm PCD; outlet flange with 4 slots 17mm equi-spaced on a 146mm PCD. Left hand operated with TIR and padlock facility to handle. Contact parts manufactured in 316 stainless steel with PTFE seals.

Downloads