Swivel Joints are used in the industry wherever a movable pipe-connection system between two equipment parts is needed. Avoiding one of the biggest causes of premature hose failure. Torque stress is the largest single cause of PTFE and Stainless steel convoluted hose failure.
The swivel joints are designed for slow rotary motions under the influence of high internal pressures and/or external stress such as traction and bending forces. With an appropriate combination of swivel joints nearly all movements from the simple rotation or swivelling motion up to motional actions in space can be realized.

Technical information

Sizes

¾” (DN20) to 10” (DN200)

Maximum Working pressure

MWP PN 10-125 bar
MAWP 150-1800 psi

Materials

Aluminium, Brass, Stainless steel,
Hastelloy, Titanium. Others on request.

Connections

Female and Male BSP / NPT, flanged DIN
and ANSI. Others on request.

Hose Swivels - single ball bearing

Compact swivel, to allow free rotation of a handling device to protect a hose from torsion.
Typically mounted at the end of the hose where handling equipment without integrated swivel is attached.
Suitable for all common liquid and gaseous media in all industrial product transfer installations.
Working pressure see additional info. Temperature range – 20° C up to + 80° C; fulfillment of larger temperature range – 50° C up to + 200° C is possible – depending on medium, coupling and seal material.  

Heavy Duty Swivels - double ball race

Compact swivel, to allow free rotation of a handling device to protect a hose from torsion.
Typically mounted at one of the ends of a hose where handling equipment without integrated swivel is attached where rotation of adjacent equipment is expected.
Suitable for all common liquid and gaseous media in all industrial product transfer installations.
Working pressure see additional info. Temperature range – 20° C up to + 80° C; fulfillment of larger temperature range – 50° C up to + 200° C is possible – depending on medium, coupling and seal material.