In addition to the footvalves KFE provides a range of welding flanges for the bottom of the tank compartment. Welding sumps and flanges are available. The materials can be steel, aluminum or stainless steel.
BVS100St/Al - Welding Sump for Bottom Valves
Product Description
The BVS100St/Al welding sump covers the demands for the installation of emergency bottom valves on the tank bottom and offers unrivalled design and installation features.
– 8 Bold Installation Interface covers the demands of EN13308 and EN13314.
– Material Selection is suitable for the weldability with steel or aluminum tanks.
– BVS100St version from S235JR Steel.
– BVS100Al version for EN AW5083-H111.
– Marking of each individual neckring assures the tank builder for the quality and traceability of the installed material.
– Wide Flat Sealing Surface allows for correct sealing and proper installation of bottom valves.
– M12x40 8.8 Studs preinstalled complete with nuts and lock washers for easy installation.
– Suitable for Aluminum or Steel ADR Class 3 tanks for carrying dangerous goods with a vapour pressure not exceeding 110kPa@50oC (absolute pressure).
Technical Data
Material: S235JR (St) / EN AW5083-H111 (Al)
Thickness: 6 mm (St) / 8 mm (Al)
Downloads
[wpdm_package id=2027 template=”57d7af918045b”]
Video Data
Technical Drawings
BVF100St/Al - Welding Flange for Bottom Valves
Product Description
The BVF100St/Al welding flange covers the demands for the installation of emergency bottom valves on the tank bottom and offers unrivalled design and installation features.
– 8 Bold Installation Interface covers the demands of EN13308 and EN13314.
– Material Selection is suitable for the weldability with steel or aluminum tanks.
– BVF100St version machined from S235JR Steel.
– BVF100Al version machined from hard drown aluminum bar.
– Marking of each individual neckring assures the tank builder for the quality and traceability of the installed material.
– Wide Flat Sealing Surface allows for correct sealing and proper installation of bottom valves.
– Internal Wide Chamfer allows for unrestricted flow from the bottom valve.
– M12x40 8.8 Studs preinstalled complete with nuts and lock washers for easy installation.
– Suitable for Steel or Aluminum ADR Class 3 tanks for carrying dangerous goods with a vapour pressure not exceeding 110kPa@50oC (absolute pressure).
Technical Data
Material: S235JR (St)
Thickness: 25 mm (St) / 30 mm (Al)
Downloads
[wpdm_package id=2030 template=”57d7af918045b”]
Video Data
Technical Drawings
